Transportled logo
LED marker light red with bracket | 12-24v | 50cm cable | MV-5250R
ECE
Horpol

LED marker light red with bracket | 12-24v | 50cm cable | MV-5250R

Artikelcode: MV-5250REAN: 5903116349450

€ 7,05

Prijs incl. btw · € 5,83 prijs excl. btw

11 op voorraad

Bestel vóór 16:00 — verzending volgende werkdag

+ verzending vanaf € 7,50 · gratis vanaf € 350,00

Europese voorraad
Technisch advies
14 dagen retour
Korting vanaf 10 stuks

Doosvoordeel

Bestel een complete doos van dit product en bespaar direct.

Geldt per identiek artikel — kies dezelfde SKU. Doos direct vanuit voorraad geleverd.

Omschrijving

The Horpol MV-5250R is part of the MV-5200 serie and is designed as a red LED marker light. Suitable for vehicle installations with a voltage range of 12-24 V, this model functions as a rear marker light. Its compact design (110x31x15 mm) and surface mounting make it easy to install on a variety of vehicle types. The housing and lens are made of polycarbonate, which contributes to its impact resistance and IP68 protection rating. This guarantees high resistance to water and dust. Electrical connection is via an open wire end with a cable length of 25 cm. The MV-5250R is certified to CE, ECE R10 and ECE R7 standards, thus complying with the relevant regulations on electromagnetic compatibility and lighting technology.

Specificaties

General

Voltage
12-24v
IP rating
IP68
Certifications
CE, ECE-R10, ECE-R7
Warranty
2 jaar

Dimensions

Dimensions
110 x 31 x 15mm
Width
110mm
Depth
15mm
Height
31mm
Centre-to-centre
82mm
Shape
Strip

Optics

Light colour
Red

Materials

Housing colour
Black
Housing material
Polycarbonate
Lens colour
Red
Lens material
Polycarbonate

Technical

Connector
Open wire end
Cable length
25cm kabel
Mounting
Surface mounting
Mounting bracket
Excl. mounting bracket

Lees u verder in

More guides

EU legislation

ECE R48 — where every lamp on a vehicle must sit.

R48 is the master installation regulation. It defines which lamps are mandatory, which are optional, where they may be mounted, and how they must switch. Individual lamp regulations (R7 for position, R87 for DRL, R65 for beacons) certify the lamp itself. R48 certifies the vehicle on which the lamps are fitted.

Read article

EU legislation

ECE R7 — position lamps, stop lamps, end-outline markers.

R7 is the baseline certification for every lamp that simply makes a vehicle visible: front and rear position lamps, stop lamps, and end-outline marker lamps. It is the most-cited regulation on product spec-sheets because most lamps on most trucks fall under it.

Read article

EU legislation

ECE R87 — daytime running lamps.

DRLs became mandatory on new EU-registered vehicles in February 2011. R87 is the regulation they comply with. It specifies luminous intensity, colour, geometry and, critically, the switching logic — a DRL that fails to shut off under main-beam is as non-compliant as one that was never fitted.

Read article