Transportled logo
LED brake light, rear light with chrome edge | 12-24v | 0.15m cable | 145RME
ECE
LED Autolamps

LED brake light, rear light with chrome edge | 12-24v | 0.15m cable | 145RME

Artikelcode: 145RMEEAN: 9335962030521
Aanhanger

€ 39,82

Prijs incl. btw · € 32,91 prijs excl. btw

22 op voorraad

Bestel vóór 16:00 — verzending volgende werkdag

+ verzending vanaf € 7,50 · gratis vanaf € 350,00

Europese voorraad
Technisch advies
14 dagen retour
Korting vanaf 10 stuks

Omschrijving

The LED Autolamps 145-serie is characterised as a round LED rear light with a diameter of 145 mm, fitted with a chrome bezel. This model is suitable for applications on vehicles within a voltage range of 12-24 V. It combines the functions: rear lights and brake lights. Due to its retro design, this LED rear light is regularly used on vehicles where the original appearance must be preserved, such as semi-trailers or classics. The housing is made of polycarbonate and the lens of acrylic, contributing to an impact-resistant construction. Thanks to surface mounting, a short 15 cm cable length with open wire end and sealing to IP67, this rear light is suitable for use in harsh environmental conditions. This model is certified according to CE, ECE-R10 and ECE-R7. Plus points of this series: Round rear lights with chrome trim Single function rear lights Retro LED model

Specificaties

General

Voltage
12-24v
IP rating
IP67
Certifications
CE, ECE-R10, ECE-R7
Warranty
5 jaar

Dimensions

Dimensions
ø145 x 23mm
Width
145mm
Depth
23mm
Height
145mm
Centre-to-centre
108mm
Shape
Round

Materials

Housing colour
Chrome
Housing material
Polycarbonate
Lens colour
Red
Lens material
Acrylic

Technical

Connector
Open wire end
Cable length
15cm kabel
Mounting
Surface mounting
Side
Universal

Other

tail functions
Rear light, Brake light

Lees u verder in

More guides

EU legislation

ECE R48 — where every lamp on a vehicle must sit.

R48 is the master installation regulation. It defines which lamps are mandatory, which are optional, where they may be mounted, and how they must switch. Individual lamp regulations (R7 for position, R87 for DRL, R65 for beacons) certify the lamp itself. R48 certifies the vehicle on which the lamps are fitted.

Read article

EU legislation

ECE R7 — position lamps, stop lamps, end-outline markers.

R7 is the baseline certification for every lamp that simply makes a vehicle visible: front and rear position lamps, stop lamps, and end-outline marker lamps. It is the most-cited regulation on product spec-sheets because most lamps on most trucks fall under it.

Read article

EU legislation

ECE R148 — unified signalling lamp regulation.

R148 replaces and unifies the previous patchwork of lamp regulations (R6, R7, R23, R38, R77, R87, R91) into one consolidated standard for signalling lamps. It came into force for new vehicle type approvals in September 2023, with full mandatory application by 2027. What was once seven regulations covering direction indicators, position lamps, reversing lamps, parking lamps, end-outline markers, DRLs and side-marker lamps is now one document.

Read article