Transportled logo
LED brake light, rear light with black edge | 12-24v | 40cm cable | 80RME
ECE
LED Autolamps

LED brake light, rear light with black edge | 12-24v | 40cm cable | 80RME

Artikelcode: 80RMEEAN: 9335962009954

€ 29,74

Prijs incl. btw · € 24,58 prijs excl. btw

13 op voorraad

Bestel vóór 16:00 — verzending volgende werkdag

+ verzending vanaf € 7,50 · gratis vanaf € 350,00

Europese voorraad
Technisch advies
14 dagen retour
Korting vanaf 10 stuks

Omschrijving

These LED rear lights from the 80-serie from LED Autolamps are designed for applications on vehicles with a voltage range of 12-24 V. The light is built in a modular design and equipped with an ABS housing and acrylic lens, suitable for surface mounting. The IP67 rating indicates that the luminaire is fully dust-proof and water-resistant. This rear light combines the functions: rear light, brake lights and reflector. With dimensions of 100x100x28 mm and equipped with a 40 cm cable with open wire end, this LED rear light solution is well suited for custom or multiple set-ups. The certifications CE, ECE-R10 and ECE-R7 confirm conformity with relevant regulations for vehicle installations. Plus points of this series: - Modular block lamp design - Available with various brackets for one to four lights - Various variants with other light functions available in the same style

Specificaties

General

Voltage
12-24v
IP rating
IP67
Certifications
CE, ECE-R10, ECE-R7
Warranty
5 jaar

Dimensions

Dimensions
100 x 100 x 28mm
Width
100mm
Depth
28mm
Height
100mm
Centre-to-centre
60mm
Shape
Square

Materials

Housing colour
Black
Housing material
ABS
Lens material
Acrylic

Technical

Connector
Open wire end
Cable length
40cm kabel
Mounting
Surface mounting
Side
Universal

Other

tail functions
Rear light, Brake light

Video

Lees u verder in

More guides

EU legislation

ECE R48 — where every lamp on a vehicle must sit.

R48 is the master installation regulation. It defines which lamps are mandatory, which are optional, where they may be mounted, and how they must switch. Individual lamp regulations (R7 for position, R87 for DRL, R65 for beacons) certify the lamp itself. R48 certifies the vehicle on which the lamps are fitted.

Read article

EU legislation

ECE R7 — position lamps, stop lamps, end-outline markers.

R7 is the baseline certification for every lamp that simply makes a vehicle visible: front and rear position lamps, stop lamps, and end-outline marker lamps. It is the most-cited regulation on product spec-sheets because most lamps on most trucks fall under it.

Read article

EU legislation

ECE R148 — unified signalling lamp regulation.

R148 replaces and unifies the previous patchwork of lamp regulations (R6, R7, R23, R38, R77, R87, R91) into one consolidated standard for signalling lamps. It came into force for new vehicle type approvals in September 2023, with full mandatory application by 2027. What was once seven regulations covering direction indicators, position lamps, reversing lamps, parking lamps, end-outline markers, DRLs and side-marker lamps is now one document.

Read article